In BSP wall connections – whether L-joint, T-joint or longitudinal joint – push and tensile forces must be reliably transmitted over the entire wall height. x-fix L is designed precisely for this purpose as a linear connector: The wedge-shaped, split dovetail coupling strip made of plywood runs over the full panel height and creates a self-tensioning effect when driven in, which pulls the wall panels together with form and force fit.

Compared to conventional screw connections on the narrow side of the panel, this results in a continuous linear force transmission that achieves strengths up to 300% higher than conventional screw connections. Installation takes place exclusively from the inside of the room – no external scaffolding is required. x-fix L is suitable for butt joints, miter joints and T-connections, while x-fix C connects the intermediate modules. The design is based on the expert opinion GU16-484-1-01 of TU Graz.

X-fix is one of the most cost-effective wall connections on the market, both in terms of total cost per linear meter and due to the short installation time.